Used Boats: 234 Adverts Displaying: 1-10
1978/2000 14.39m x 4.82m x 1.71m Aluminum 46 PAX
Twin Screw, Double Deck Passenger Boat
47.1' x 15.8' x 5.7'
Certified for Inland II Waters
Originally built in 1978 - rebuilt in 2000
Bulkheads: 5
Headroom: Wheelhouse and cabin - 7', Engine room - 6.5'
(2) 204 hp CAT engines (2010)
(2) ZF 220A 2:1 transmissions
Shaft size: 2"
Hydraulic steering
Cruising speed: 9.4 knots
Navigation Equipment: 2 VHF Radios, Furuno GPS, Furuno Radar, Compass
Fuel capacity: 2000 litres
Fresh water capacity: 250 litres
Holding tank: 500 litres
Head: Yes
Safety equi...
read more
Year: | 1978 |
Length: | 14.39m |
Location: | Ontario Canada |
Price: | $550,000 |
View Details |
64′ x 18′ 1100 hp Tug with Retractable Wheelhouse
New Price: $69,900 USD
With great lines and loads of power, she’s ready to go, go, go!
Modernized in the 1970’s with the addition of a retractable wheelhouse
Built in 1903 by Johnston Brothers of Ferrysburg, Michigan
Last survey 2012
6′ draft
Double steel hull
Powered by Detroit 16-V149, 1100 hp
Twin Disc MG 540
Generators: 2 – 1 Perkins, 1 Detroit
Fuel capacity: 2000 gal
Lube oil capacity: 200 gal
Cruising speed 10 knots
Prop: 4 blade 76″ x 54″ turning a 6″ shaft
Good over...
read more
Year: | 1903 |
Length: | 64' |
Location: | New York USA |
Price: | $69,900 |
View Details |
1983 30′ x 9′ Welded Steel Motor Boat Project Boat
Price: $9,500 CDN or Best Offer
This project boat has nice lines and loads of potential!
3′ Draft
Built by Kettle Creek Boat Works, Port Stanley, Ontario, Hull #1
Registered tonnage: 4.5 tons
Engine is Perkins (1983) 4.108 51 hp diesel
Condition of propulsion system: not run in 8 years
Stainless fuel tank estimated 80 – 90 gal capacity
Shell plating is 3/16″ with 1/8″ on cabin sides and top
2″ x 3/16″ flat bar ribs on 24″ centers
1″ x 3/16″ flat bar longitudinal hull ...
read more
Year: | 1983 |
Length: | 30' |
Location: | Canada |
Price: | $9,500 |
View Details |
750 kW Kohler Genset w/16v92 Detroit Diesel
Price: $8,500 CDN
3 phase
480 v
Newer Panelsource control panel
Powered with a 2008 model Detroit Diesel 16v92 powerplant
Low hours, good runner but liner o-rings are leaking
Self-contained skid mounted
No fuel tank
Delivery available depending on location
Location: Toronto, Ontario...
read more
2023 30′ x 10′ Aluminum Landing Craft Powered by Suzuki c/w Trailer
PRICE: $208,000 CDN
Powered by 2023 Suzuki DF300apx w/ precision controls
39 mph top speed at 5600 rpm
3/16″ aluminum hull
77 gal fuel capacity
72″ wide electric bow gate door
15.5′ deck space ahead of cabin
Shallow draft hull design
Self-bailing floor
Includes HD adjustable trailer
Located near Port Dover, Ontario...
read more
Year: | 2023 |
Length: | 30' |
Location: | Ontario Canada |
Price: | $208,000 |
View Details |
1995 17′ x 6.5′ x 1′ Steel Flat Bottom Jet Propelled Work Boat
Price: $3,500 CDN
•Jet: Hamilton Jet
• Engine: 302 Ford Mercruiser- gas
• Top speed 30 to 35mph
• Great shallow draft work Boat
•Includes single axle trailer
Located in Port Dover, Ontario...
read more
Year: | 1995 |
Length: | 17' |
Location: | Ontario Canada |
Price: | $3,500 |
View Details |
10′ x 11′ Antique Trotman Style Anchor
Price: $20,000 USD obo
Weight approx. 4,000 lbs
Location: Ohio...
read more
2010 Portable Suction Dredge
Price: $147,000 CDN
Width: 8’6
Length: 26', Cutter head 18'
Draft: 20″
6″ Suction, 8″ Discharge
Both sides can discharge or can be discharged out stern valves on discharge lines
Digging depth approx 8′
Articulating cutter head – approx 6′ swing
Powered by a 4-53 GM
Located in Southern Ontario (Lake Erie area)
File Ref D2138...
read more
Year: | 2010 |
Length: | 25' |
Location: | Ontario Canada |
Price: | $147,000 |
View Details |
Timberland 5 Drum Mechanical Winch
Centre drum has a dog
D311 CAT power
With a funk reversing drive
Electric frictions....
read more
Detroit Diesel 8V 92 Natural Marine Engines LH & RH
Price: $7,500 CDN each
Good runners
Removed from a buoy tender
Pay & Brinck gears, model PB130, ratio is 3:1
Located in: Port Dover, Ontario...
read more